Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
user:quick:quick [25/01/2019 10:50]
irra removed
user:quick:quick [25/01/2019 11:48] (current)
irra created
Line 1: Line 1:
 {{indexmenu_n>​1}} {{indexmenu_n>​1}}
-====== Quick Start =====+======Quick ​start=====
- +
-===== 1. Login ===== +
- +
-On the login page, specify your username and password and press //Enter//.  +
- +
-:!: The supported browsers are listed in the //​[[req/​req|]]//​ section. +
- +
-{{ :​quick:​login.png?​nolink }} +
- +
-===== 2. Interface ===== +
- +
-You have entered the main interface of the tracking system. On the right, there is the map, on the left — the [[user/​gui/​left|work area]]. Here you can work with such panels as //​Monitoring,​ Tracks, Geofences, Jobs, Notifications//,​ etc. These panels are chosen in the [[user/​gui/​left#​main_menu_adjustment_and_navigation|Main menu]] above the map and work area. +
- +
-In the //Quick Start// section, you can read about working with some of the panels. Adjust the [[user/​gui/​left#​main_menu_adjustment_and_navigation|main menu]] and select the panels which you want to work with, such as //​Monitoring,​ Messages, Reports, Geofences, Notifications,​ Units//. +
-{{ :​quick:​blank.png?​nolink }} +
- +
-You can drag the [[user/​gui/​map|map]] with the left mouse button and use the zoom it in/out with the mouse scroll to move to the required location (city).  +
- +
-===== 3. User Settings ===== +
- +
-In order to configure the user parameters, click on the username in the right corner of the [[user/​gui/​top|top panel]] and press the //User settings// button in the drop-down menu. Afterwards, follow the steps: +
- +
-  * Indicate your time zone. +
-  * Select the type of transition to daylight saving time used in your region. +
- +
-{{ :​quick:​set.png?​nolink }} +
- +
-:!: Make sure to select the above-mentioned settings properly, as they can influence the accuracy of the data presented in reports, messages, tooltips, jobs, routes, and other system functions.\\ +
- +
-Indicate the //​[[user/​set/​general|City]]//​ setting in the same dialog. It is necessary to ensure that the map is zoomed in on the selected city at each login. +
- +
-{{ :​quick:​set1.png?​nolink }} +
- +
-Preparatory work is finished. Continue to create a tracking unit. +
- +
-===== 4. Creating Unit ===== +
- +
-:!: Before configuring a unit, make sure the device is directed to Wialon. For more information on the server IP, port, phone number, and other characteristics,​ find your type of device in the [[http://​gurtam.com/​en/​products/​datacenter/​hw.html|list of supported devices]] and set the required parameters. ​  +
- +
-In the work area, open the //​[[user/​units/​units|Units]]//​ panel and press the //New// button.  +
- +
-{{ :​quick:​no_units.png?​nolink }} +
- +
-The dialog with multiple unit settings opens. Specify the name of the unit, the device type (after you specify the type, the server address is defined automatically),​ the unique ID (IMEI or serial number), the phone number of the SIM card inserted into the device and the password.  +
- +
-{{ :​quick:​general.png?​nolink }} +
- +
-The //Icon// tab of the dialog allows to choose the image to display the unit on the map.  +
- +
-{{ :​quick:​icon.png?​nolink }} +
- +
-On the //​Advanced//​ tab specify the //Speed limit, km/h//. This setting is used to generate reports on speedings.  +
- +
-{{ :​quick:​adv.png?​nolink }} +
- +
-At the end, click //OK//. The newly created unit appears in the list. Click on the unit name to locate it on the map.  +
- +
-{{ :​quick:​units.png?​nolink }} +
- +
-It also appears in the monitoring panel.  +
- +
-{{ :​quick:​mon.png?​nolink }} +
- +
-===== 5. Unit Check ===== +
- +
-**a) Log** +
- +
-If all the settings are configured correctly, the data from the unit starts entering the system. Each incoming message appears in the //​[[user/​gui/​log|log]]//​. To see the log, press the button in the lower right corner of the program.  +
- +
-{{ :​quick:​log.png?​nolink }} +
- +
-Besides the messages from the tracking units, the log also registers current actions and operations such as creation and modification of geofences, notifications,​ unit properties, etc.  +
- +
-**b) Unit info tip** +
- +
-Hover the mouse over the unit in the //​Monitoring//​ panel or on the map to see the latest data in a [[user/​monitor/​monitor#​unit_info_tip|tooltip]]:​ last message time, location (address or coordinates),​ speed, etc. +
- +
-{{ :​quick:​tooltip.png?​nolink }}  +
- +
-**c) Messages panel** +
- +
-The most reliable way to check the unit performance is to view its [[user/​msg/​msg|messages]]. To switch to the //​Messages//​ panel, click on the //​Messages//​ tab in the main menu. Then, select the interval for which you want to receive messages, and press //​Execute//​. The results appear on the right. There you can estimate the number of the messages received during the indicated period and what kind of data they present. Besides, the map displays the track of unit movements.  +
- +
-{{ :​quick:​msg.png?​nolink }} +
- +
-===== 6. Creating Geofences ===== +
- +
-[[user/​geo/​geo|Geofences]] are created in the places of interest which should get under control. To create a geofence, go to the //​Geofences//​ panel and click //New//.  +
- +
-{{ :​quick:​no_geo.png?​nolink }} +
- +
-The simplest and quickest geofence type to create is the //circle// with the specified radius. Enter the name for the geofence and select the type //Circle//. Then double-click on the place on the map where the geofence is supposed to be. If necessary, alter the radius and press //Save//.  +
- +
-{{ :​quick:​geo.png?​nolink }} +
- +
-In a similar way, create as many geofences as necessary.  +
- +
-:!: If you need a geofence of a more complex shape, choose the type //Polygon// or //Line//. However, in this case, a greater number of points is required to specify the borders of the geofence.  +
- +
-===== 7. Notifications ===== +
- +
-Now we can create a [[user/​notify/​notify|notification]] about a unit entering a geofence. Go to the //​Notifications//​ panel and press the //Create Notification//​ button.  +
- +
-{{ :​quick:​no_notify.png?​nolink }} +
- +
-Moving through the dialog with the help of the //Next// button, set the following parameters for the notification:​  +
- +
-  - Select your unit (click the checkbox).  +
-  - Choose the control type (in our example we choose //​Geofence//​). +
-  - Specify the check type (//Inside geofence//​),​ and select necessary geofence(s) from the list below. ​  +
-  - Choose the method of notification delivery, for example, //Display online notification in a popup window//.  +
-  - Leave default notification text without changes.  +
-  - Enter the name for the notification.  +
-  - Press //ОК//.  +
- +
-When the notification triggers, it appears in the top right corner of the program.  +
- +
-{{ :​quick:​notify.png?​nolink }} +
- +
-===== 8. Reports ===== +
- +
-To switch to the [[user/​reports/​reports|Reports]],​ click the corresponding tab in the [[user/​gui/​top|top panel]].  +
- +
-{{ :​quick:​rep1.png?​nolink }} +
- +
-First of all, to generate a report at least one [[user/​reports/​templ/​templ|report template]] is required. We are going to create a report template containing two [[user/​reports/​tables/​tables|tables]] (visits to geofences and speeding) and a [[user/​reports/​templ/​contents/​charts/​charts|chart]].  +
- +
-To create a report template, go to the Reports panel and click //New//. At the top of the template properties dialog, there are the //Add Table// and //Add Chart// buttons.  +
- +
-{{ :​quick:​rep2.png?​nolink }} +
- +
-Press the //Add Table// button and in the drop-down list select the //​Geofences//​ table type. On the left, tick the columns which should be displayed in the report. On the right, choose the geofence(s). When finished, press //OK//. The table is added to the report.  +
- +
-{{ :​quick:​rep3.png?​nolink }} +
- +
-Then add the second table — press //Add Table// again and select //​Speedings//​. For this table we have set the //Speed limit// parameter in the unit properties (//​Advanced//​ tab). In the additional parameters, section indicate that a speeding should last at least one minute (//Min duration// parameter). Press //OK//. The table is added to the report.  +
- +
-{{ :​quick:​rep4.png?​nolink }} +
- +
-Then click //Add Chart// and select the required [[user/​reports/​templ/​contents/​charts/​charts|chart]] type (for example, mileage in trips). Note that many charts require the appropriate sensors. Press //OK//.  +
- +
-{{ :​quick:​rep5.png?​nolink }} +
- +
-This is how the report template with two tables and one chart looks like. The report contents are displayed on the left. Name the report and save it.  +
- +
-{{ :​quick:​rep6.png?​nolink }} +
- +
-To generate the report, set the parameters in the work area: select the report template, unit, reported interval, and press //​Execute//​.  +
- +
-{{ :​quick:​rep7.png?​nolink }} +
- +
-The report appears on the right. On the left, there are the tabs to navigate between the report sections (tables and charts). Besides, the report can be exported to various formats, or printed (to do it, use the buttons — //Export to File// and //Print//).  +
- +
-{{ :​quick:​rep8.png?​nolink }} +
- +
-{{ :​quick:​rep9.png?​nolink }} +
- +
-{{ :​quick:​rep10.png?​nolink }}+
  
 +You can find the //Wialon. Quick Start// user guide [[https://​docs.wialon.com/​hosting/​quickguide/​en/​Default.htm|here]].
Follow us on Facebook Gurtam Wialon Twitter Gurtam Wialon info@gurtam.com   |   Copyright © 2002-2019 Gurtam