Installation of Wialon Local

The distribution of Wialon Local contains also operating system Debian Linux (Jessie). In case of installation onto Windows server, use a virtual machine.

First, download ISO image from the distribution server and write it onto a CD, DVD, or USB flash drive.

Adjust BIOS configuration in such a way to boot from CD/DVD drive. Then follow the instructions on the screen:

1. Choose installation type: on one drive, two (RAID-1), or four (RAID-10) drives.


2. If more than one network is detected, you will be asked to select one to be used during the installation process.

However, if DHCP server is not available during the installation, check network availability and repeat network adjustment or set network parameters manually:


3. Set up password for root account — main account of your Debian OS.


4. If installation on one drive was chosen in the beginning, select a particular drive here.


5. When installation process is complete, the system will reboot automatically (do not forget to readjust BIOS settings back). After reboot, URL address for Wialon Local administration system will be shown.


6. Enter this URL in your browser's address bar. To authorize, use user name and password given to you when purchasing Wialon Local.


7. After successful authorization, Wialon Local will be downloaded and installed. It may take some time.

8. When the process is complete, the Administration Panel will show up.

Entering administration system, you can get a warning like on the image below (You are looking for site that is not available here. Please check your DNS configuration.)

In this case, you should write your new address for the administration system in the file /etc/nginx/conf.d/lcm.conf. For example,

server_name      192.168.100.231 127.0.0.1 your-new-name.server; 
Follow us on Facebook Gurtam Wialon Twitter Gurtam Wialon info@gurtam.com   |   Copyright © 2002-2017 Gurtam